
The Husqvarna 545 is designed for demanding contractors and landowners. It has an innovative design and is very powerful for efficient operation. The unique engine technology of the powerful X-TORQ® engine ensures fuel savings (20% lower consumption), better working environment due to reduced emissions by 75% and higher cutting torque.
| > Maximum power: 3.1 kW |
| > Cubic capacity: 59.8 cm ³ |
| > Maximum power speed: 9600 rpm |
| > Maximum recommended rotation speed: 13600 rpm |
| > Speed per minute idle: 2800 rpm |
| > Maximum torque (Nm): 3.51 Nm |
| > Maximum torque (rpm): 6100 rpm |
| > Clutch clutch speed: 4300 rpm |
| > Fuel consumption: 438 g / kWh |
| > Fuel consumption: 1.35 kg / h |
| > Spark plug: NGK CMR6H |
| > Electrode gap: 0.5 mm |
| > Ignition system air clearance: 0.3 mm |
| > Oil pump type: Adjustable flow |
| > Oil pump supply: Max 15 ml / min |
| > Oil pump supply: Min 6 ml / min |
| > Chain speed at maximum power: 21.3 m / s |
| > Chain speed at 133% of maximum engine power 28.3 m / s |
| > Weight (without cutting equipment): 5.9 kg |
| > Husqvarna lubricant type two-stroke or equivalent in 50: 1 |
| > Oil tank capacity 0.33 l |
| > Guaranteed noise level, Lwa: 118 dB (A) |
| > Noise emission measurement: 116 dB (A) |
| > Noise pressure in the operator's ears: 106 dB (A) |
| > Vibration level correspondence (ahv, eq) front handle 3.2 m / s² |
| > Vibration level correspondence (ahv, eq) rear handle 5.0 m / s² |